H3C S7500E Series Command Manual page 863

Command Manual – Multicast
H3C S7500E Series Ethernet Switches
Parameters
source-address: Multicast source address.
group-address: Multicast group address, in the range of 224.0.1.0 to 239.255.255.255.
mask: Mask of the multicast group/source address, 255.255.255.255 by default.
mask-length: Mask length of the multicast group/source address. For a multicast group
address, this argument has an effective value range of 4 to 32; for a multicast source
address, this argument has an effective value range of 0 to 32. The system default is 32
in both cases.
incoming-interface: Displays multicast routing entries of which the incoming interface
is the specified one.
interface-type interface-number: Specifies an interface by its type and number.
register: Specifies the register interface of PIM-SM.
outgoing-interface: Displays multicast routing entries of which the outgoing interface
is the specified one.
exclude: Displays routing entries of which the outgoing interface list excludes the
specified interface.
include: Displays routing entries of which the outgoing interface list includes the
specified interface.
match: Displays routing entries of which the outgoing interface list includes only the
specified interface.
Description
Use the display multicast routing-table command to view the multicast routing table
information.
Related commands: display multicast forwarding-table.
Examples
# View the routing information in the multicast routing table.
<Sysname> display multicast routing-table
Multicast routing table
Total 1 entry
00001. (172.168.0.2, 227.0.0.1)
Uptime: 00:00:28
Upstream Interface: Vlan-interface2
List of 2 downstream interfaces
1: Vlan-interface3
2: Vlan-interface1
Chapter 6 Multicast Routing and Forwarding
6-5
Configuration Commands