Display Bgp Ipv6 Group - H3C S7500E Series Command Manual

Command Manual – IPv6 Routing
H3C S7500E Series Ethernet Switches
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] default-route imported
[Sysname-bgp-af-ipv6] import-route ospfv3 1

5.1.10 display bgp ipv6 group

Syntax
display bgp ipv6 group [ ipv6-group-name ]
View
Any view
Parameters
ipv6-group-name: Peer group name, a string of 1 to 47 characters.
Description
Use the display bgp ipv6 group command to display IPv6 peer group information.
If no ipv6-group-name is specified, information about all peer groups is displayed.
Examples
# Display the information of the IPv6 peer group aaa.
<Sysname> display bgp ipv6 group aaa
BGP peer-group is aaa
remote AS number not specified
Type : external
Maximum allowed prefix number: 4294967295
Threshold: 75%
Configured hold timer value: 180
Keepalive timer value: 60
Minimum time between advertisement runs is 30 seconds
Peer Preferred Value: 0
No routing policy is configured
Members:
Peer
20:20::20:1 4
V AS MsgRcvd MsgSent
200 170
5-8
Chapter 5 IPv6 BGP Configuration Commands
OutQ PrefRcv Up/Down
141 0 2 02:13:35 Established
State