H3C S7500E Series Command Manual page 1350

Hide thumbs Also See for S7500E Series:

Table of Contents

Command Manual – System Maintaining and Debugging

H3C S7500E Series Ethernet Switches

Use the quit command to exit to a lower-level view. If the current view is user view, the

quit command terminates the current connection and reconnects to the device.

# Switch from Ethernet 2/0/1 port view to system view, and then to user view.

[Sysname-Ethernet2/0/1] quit

[Sysname] quit

Kill outgoing connection.

Display the next command from the history buffer.

Display the previous command from the history buffer.

Redisplay the current line.

Paste text from the clipboard.

Delete the word left of the cursor.

Delete all characters up to the cursor.

Delete all characters after the cursor.

Return to the user view.

Kill incoming connection or redirect connection.

Move the cursor one word back.

Delete remainder of word.

Move the cursor forward one word.

Move the cursor down a line.

Move the cursor up a line.

Specify the beginning of clipboard.

Specify the end of clipboard.

Chapter 1 Basic Configuration Commands

Chapters

Table of Contents