Mac Authentication Configuration Commands; Display Mac-Authentication - H3C S7500E Series Command Manual

Command Manual – 802.1x - MAC Authentication
H3C S7500E Series Ethernet Switches
Chapter 3 MAC Authentication Configuration

3.1 MAC Authentication Configuration Commands

3.1.1 display mac-authentication

Syntax
display mac-authentication [ interface interface-list ]
View
Any view
Parameter
interface interface-list: Specifies an Ethernet port list, in the format of { interface-type
interface-number [ to interface-type interface-number ] }&<1-10>, where &<1-10>
indicates that you can specify up to 10 port ranges. A port range defined without the to
interface-type interface-number portion comprises only one port. With an interface
range, the end interface number and the start interface number must be of the same
type and the former must be greater than the latter.
Description
Use the display mac-authentication command to display global MAC authentication
information or MAC authentication information about specified ports.
Examples
# Display global MAC authentication information.
<Sysname> display mac-authentication
MAC address authentication is enabled.
User name format is MAC address, like xxxxxxxxxxxx
Fixed username:mac
Fixed password:not configured
Commands
Offline detect period is 300s
Quiet period is 60s.
Server response timeout value is 100s
the max allowed user number is 2048 per slot
Current user number amounts to 0
Current domain: not configured, use default domain
Chapter 3 MAC Authentication Configuration
3-1
Commands