Chapter 5 Msdp Configuration Commands - H3C S7500E Series Command Manual

Command Manual – Multicast
H3C S7500E Series Ethernet Switches

Chapter 5 MSDP Configuration Commands

Note:
The term "router" in this document refers to a router in the generic sense or a Layer 3
switch running MSDP.
5.1 MSDP Configuration Commands
5.1.1 cache-sa-enable
Syntax
cache-sa-enable
undo cache-sa-enable
View
MSDP view
Parameters
None
Description
Use the cache-sa-enable command to enable the SA message cache mechanism.
Use the undo cache-sa-enable command to disable the SA message cache
mechanism.
By default, the SA message cache mechanism is enabled.
Examples
# Enable the SA message cache mechanism.
<Sysname> system-view
[Sysname] msdp
[Sysname-msdp] cache-sa-enable
Chapter 5 MSDP Configuration Commands
5-1