Display Info-Center - H3C S7500E Series Command Manual

Command Manual – Information Center
H3C S7500E Series Ethernet Switches
If no channel is specified, information for all channels is displayed.
Examples
# Display information for channel 0.
<Sysname> display channel 0
channel number:0, channel name:console
MODU_ID NAME
ffff0000 default
Table 1-2 Description on the fields of the display channel command
Field
channel number
channel name
MODU_ID
NAME
ENABLE
LOG_LEVEL
ENABLE
TRAP_LEVEL
ENABLE
DEBUG_LEVEL
The above information indicates to output log information with the severity from 0 to 4,
trap information with the severity from 0 to 7 and debugging information with the
severity from 0 to 7 to the console. The information source modules are all modules
(default).

1.1.2 display info-center

Syntax
display info-center
ENABLE LOG_LEVEL
Y warnings
A specified channel number, in the range 0 to 9.
A specified channel name, which varies with user's
configuration. For more information, refer to the info-center
channel name command.
The ID of the module to which the information permitted to pass
through the current channel belongs
The name of the module to which the information permitted to
pass through the current channel belongs
Default means all modules are allowed to output system
information, but the module type varies with devices.
Indicates whether to enable or disable the output of log
information, which could be Y or N.
The severity of log information, refer to
Indicates whether to enable or disable the output of trap
information, which could be Y or N.
The severity of trap information, refer to
Indicates whether to enable or disable the output of debugging
information, which could be Y or N.
The severity of debugging information, refer to
details.
1-2
Chapter 1 Information Center Configuration
ENABLE TRAP_LEVEL
Y debugging
Description
Table 1-4
Table 1-4
Commands
ENABLE DEBUG_LEVEL
Y debugging
for details.
for details.
Table 1-4 for