H3C S7500E Series Command Manual page 814

Command Manual – Multicast
H3C S7500E Series Ethernet Switches
Related commands: holdtime assert, pim holdtime assert, pim holdtime
join-prune.
Examples
# Set the global value of the join/prune timeout time to 280 seconds.
<Sysname> system-view
[Sysname] pim
[Sysname-pim] holdtime join-prune 280
4.1.31 jp-pkt-size
Syntax
jp-pkt-size packet-size
undo jp-pkt-size
View
PIM view
Parameters
packet-size: Maximum size of join/prune messages in bytes, with an effective range of
100 to 8,100.
Description
Use the jp-pkt-size command to configure the maximum size of join/prune messages.
Use the undo jp-pkt-size command to restore the system default.
By default, the maximum size of join/prune messages is 8,100 bytes.
Related commands: jp-queue-size.
Examples
# Set the maximum size of join/prune messages to 1,500 bytes.
<Sysname> system-view
[Sysname] pim
[Sysname-pim] jp-pkt-size 1500
4.1.32 jp-queue-size
Syntax
jp-queue-size queue-size
undo jp-queue-size
Chapter 4 PIM Configuration Commands
4-32