Sftp Server Enable - H3C S7500E Series Command Manual

Command Manual – SSH
H3C S7500E Series Ethernet Switches
Parameters
server: IPv6 address or name of the server, a string of 1 to 46 characters.
port-number: Port number of the server, in the range 0 to 65535. The default is 22.
prefer-ctos-cipher: Preferred encryption algorithm from client to server, defaulted to
aes128.
3des: Encryption algorithm 3des-cbc.
aes128: Encryption algorithm aes128-cbc.
des: Encryption algorithm des-cbc.
prefer-ctos-hmac: Preferred HMAC algorithm from client to server, defaulted to sha1.
md5: HMAC algorithm hmac-md5.
md5-96: HMAC algorithm hmac-md5-96.
sha1: HMAC algorithm hmac-sha1.
sha1-96: HMAC algorithm hmac-sha1-96.
prefer-kex: Preferred key exchange algorithm, defaulted to dh-group-exchange.
dh-group-exchange:
diffie-hellman-group-exchange-sha1.
dh-group1: Key exchange algorithm diffie-hellman-group1-sha1.
dh-group14: Key exchange algorithm diffie-hellman-group14-sha1.
prefer-stoc-cipher: Preferred encryption algorithm from server to client, defaulted to
aes128.
prefer-stoc-hmac: Preferred HMAC algorithm from server to client, defaulted to sha1.
Description
Use the sftp ipv6 command to establish a connection to a remote IPv6 SFTP server
and enter SFTP client view.
Examples
# Connect to server 2:5::8:9.
<Sysname> sftp ipv6 2:5::8:9
Input Username:

1.1.20 sftp server enable

Syntax
sftp server enable
undo sftp server enable
View
System view
Chapter 1 SSH Configuration Commands
Key exchange
1-17
algorithm