Display Ip Ipv6-Prefix - H3C S7500E Series Command Manual

Command Manual – IPv6 Routing
H3C S7500E Series Ethernet Switches
<Sysname> system-view
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy] if-match as-path 1
[Sysname-route-policy] apply ipv6 next-hop 3ffe:506::1

6.2.2 display ip ipv6-prefix

Syntax
display ip ipv6-prefix [ ipv6-prefix-name ]
View
Any view
Parameters
ipv6-prefix-name: IPv6 prefix list name, a string of 1 to 19 characters.
Description
Use the display ip ipv6-prefix command to display the statistics of the specified IPv6
prefix list. If no IPv6 prefix list is specified, the statistics of all the IPv6 prefix lists will be
displayed.
Examples
# Display the statistics of all the IPv6 prefix lists.
<Sysname> display ip ipv6-prefix
Prefix-list6 abc
Permitted 0
Denied 0
Table 6-1 Description on the fields of the display ip ipv6-prefix command
Prefix-list6
Permitted
Denied
Index
Permit
::/1
index: 10
index: 20
Field
Name of the IPv6 prefix list
Number of routes satisfying the match criterion
Number of routes not satisfying the match criterion
Internal serial number of address prefix list
Matching mode: permit, deny
IPv6 address and its prefix length for matching
Chapter 6 Routing Policy Configuration Commands
permit ::/0
permit ::/1
Description
6-2
ge 1 le 128