H3C S7500E Series Command Manual page 1394

Command Manual – HA
H3C S7500E Series Ethernet Switches
<Sysname> display vrrp
IPv4 Standby Information:
Run Method
Virtual IP Ping : Enable
The total number of the virtual routers: 1
Interface
---------------------------------------------------------------------
Vlan100
# Display detailed information about all standby groups on the device.
<Sysname> display vrrp verbose
IPv4 Standby Information:
Run Method
Virtual IP Ping : Enable
Interface
VRID
Admin Status
Config Pri
Preempt Mode
Auth Type
Track IF
Virtual IP
Virtual MAC
Master IP
Table 1-1 Description on the fields of the display vrrp command
Run Method
Virtual IP Ping
Interface
VRID
Adver. Timer
Admin Status
State
Config Pri
Run Pri
Preempt Mode
: VIRTUAL-MAC
VRID State
1 Master
: VIRTUAL-MAC
: Vlan-interface100
: 1
: UP
: 100
: YES
: NONE
: Vlan-interface200
: 10.10.10.2
: 0000-5e00-0101
: 10.10.10.1
Field
Current VRRP running mode, real MAC or virtual MAC
Whether you can ping the virtual IP address of the standby
group
Interface to which the standby group belongs
Number of the standby group
VRRP advertisement interval
Administrative state: UP or DOWN
Status of the switch in the standby group, master, backup, or
initialize
Configured priority
Running priority
Preemption mode
Chapter 1 VRRP Configuration Commands
Run Adver.
Pri Time
100 1
Adver. Timer
State
Run Pri
Delay Time
Pri Reduced
Description
1-2
Auth Virtual
Type IP
NONE 10.10.10.2
: 1
: Master
: 100
: 0
: 10