Reset Igmp Group Port-Info - H3C S7500E Series Command Manual

Hide thumbs Also See for S7500E Series:

Table of Contents

Command Manual – Multicast

H3C S7500E Series Ethernet Switches

<Sysname> reset igmp group interface vlan-interface 100 225.0.0.1

# Clear the IGMP forwarding entries of multicast groups on subnet 225.1.1.0/24 on

VLAN-interface 100 and the IGMP Snooping forwarding entries of multicast groups on

this subnet in VLAN 100.

<Sysname> reset igmp group interface vlan-interface 100 225.1.1.0 mask 24

3.1.23 reset igmp group port-info

reset igmp group port-info { all | group-address } [ vlan vlan-id ]

all: Clears Layer 2 port information of all the IGMP multicast groups.

group-address: Clears Layer 2 port information of the specified IGMP multicast group.

The effective range of group-address is 224.0.1.0 to 239.255.255.255.

vlan-id: Clears Layer 2 port information of IGMP multicast groups in the specified VLAN.

The effective range of vlan-id is 1 to 4094.

Use the reset igmp group port-info command to clear Layer 2 port information of

IGMP multicast groups.

Layer 2 ports for IGMP multicast groups include member ports and router ports.

This command cannot clear Layer 2 port information about IGMP multicast groups

of static joins.

Related commands: display igmp group port-info.

# Clear Layer 2 port information of all IGMP multicast groups in all VLANs.

<Sysname> reset igmp group port-info all

# Clear Layer 2 port information of all IGMP multicast groups in VLAN 100.

<Sysname> reset igmp group port-info all vlan 100

# Clear Layer 2 port information about multicast group 225.0.0.1 in VLAN 100.

<Sysname> reset igmp group port-info 225.0.0.1 vlan 100

Chapter 3 IGMP Configuration Commands

Table of Contents