Snmp-Agent Trap Queue-Size; Snmp-Agent Trap Source - H3C S7500E Series Command Manual

Command Manual – SNMP-RMON
H3C S7500E Series Ethernet Switches

1.1.23 snmp-agent trap queue-size

Syntax
snmp-agent trap queue-size size
undo snmp-agent trap queue-size
View
System view
Parameters
size: The queue size for the Trap messages, in the range 1 to 1,000.
Description
Use the snmp-agent trap queue-size command to configure the size of the Trap
queue.
Use the undo snmp-agent trap queue-size command to restore the default queue
size.
By default, up to 100 Trap messages can be stored in the Trap queue.
Related
snmp-agent trap life.
Examples
# Configure the size of the Trap queue as 200.
<Sysname> system-view
[Sysname] snmp-agent trap queue-size 200

1.1.24 snmp-agent trap source

Syntax
snmp-agent trap source interface-type interface-number
undo snmp-agent trap source
View
System view
Parameters
interface-type interface-number: Specifies the interface type and interface number.
commands: snmp-agent
Chapter 1 SNMP Configuration Commands
trap enable,
1-23
snmp-agent target-host,