Display Logbuffer - H3C S7500E Series Command Manual

Command Manual – Information Center
H3C S7500E Series Ethernet Switches
Note:
Only devices that support the logfile feature display the related logfile information after
the execution of the display info-center command.

1.1.3 display logbuffer

Syntax
display logbuffer [ level severity | size buffersize | slot slotnum] * [ | { begin | exclude
| include } text ]
View
Any view
Parameters
level severity: Displays information of the log with specified level, where severity
represents information level, in the range 0 to 7.
Table 1-4 Severity description
Severity
emergencies
alerts
critical
errors
warnings
notifications
informational
debugging
size buffersize: Displays specified number of the latest log messages in the log buffer,
where buffersize represents the number of the latest log messages to be displayed in
the log buffer, in the range 1 to 1,024.
slot slotnum: Slot number.
|: Uses a regular expression to filter the output information. For detailed information
about regular expression, refer to section CLI Display in System Maintaining and
Debugging.
Value
0 The system is unavailable
1 Information that requires prompt reaction
2 Critical information
3 Error information
4 Warnings
5 Normal errors with important information
6 Informational information to be recorded
7 Debugging information
1-5
Chapter 1 Information Center Configuration
Description
Commands