File System Configuration Commands; Chapter 1 File System Management Commands - H3C S7500E Series Command Manual

Command Manual – File System Management
H3C S7500E Series Ethernet Switches

Chapter 1 File System Management Commands

Note:
Throughout this document, a filename can be entered as either of the following:
A fully qualified filename with the path included to indicate a file under a specific
path. The filename can be 1 to 135 characters in length, excluding the ending
character.
A short filename with the path excluded to indicate a file in the current working path.
The filename can be 1 to 91 characters in length.

1.1 File System Configuration Commands

1.1.1 cd
Syntax
cd directory
View
User view
Parameters
directory: Name of the target directory.
Description
Use the cd command to change the current directory.
Examples
# Change the current directory to the Flash.
<Sysname> cd flash:
# Return to the upper directory.
<Sysname> cd ..
# Return to the root directory.
<Sysname> cd /
Chapter 1 File System Management Commands
1-1