H3C S7500E Series Command Manual page 670

Command Manual – IPv6 Configuration
H3C S7500E Series Ethernet Switches
Parameters
ipv6-address: IPv6 address whose neighbor information is to be displayed.
all: Displays information of all neighbors, including neighbors acquired dynamically and
configured statically.
dynamic: Displays information of all neighbors acquired dynamically.
static: Displays information of all neighbors configured statically.
slot slot-number: Displays information of the neighbors of a specified slot.
interface interface-type interface-number: Displays information of the neighbors of a
specified interface.
vlan vlan-id: Displays information of the neighbors of a specified VLAN whose ID
ranges from 1 to 4094.
|: Filters the output information.
begin: Displays the neighbor entries from the first one containing the specified
character string.
include: Displays the neighbor entries containing the specified character string.
exclude: Displays the neighbor entries without the specified character string.
text: Character string.
Description
Use the display ipv6 neighbors command to display neighbor information.
Examples
# Display all neighbor information.
<Sysname> display ipv6 neighbors all
IPv6 Address
FE80::200:5EFF:FE32:B800
Table 1-7 Description on fields of the display ipv6 neighbors command
IPv6 Address
Link-layer
VID
Interface
Type: S-Static
Field
IPv6 address of a neighbor
Link layer address (MAC address of a neighbor)
VLAN to which the interface connected with a neighbor
belongs
Interface connected with a neighbor
Chapter 1 IPv6 Basics Configuration Commands
D-Dynamic
Link-layer VID Interface
0000-5e32-b800 1
Description
1-8
State T
Eth3/0/3 REACH
Age
S -