Authentication Login - H3C S7500E Series Command Manual

Command Manual – AAA RADIUS HWTACACS
H3C S7500E Series Ethernet Switches
[Sysname-isp-system] authentication lan-access radius-scheme rd local

1.1.10 authentication login

Syntax
authentication login { hwtacacs-scheme hwtacacs-scheme-name [ local ] | local |
none | radius-scheme radius-scheme-name [ local ] }
undo authentication login
View
ISP domain view
Parameters
hwtacacs-scheme hwtacacs-scheme-name: Specifies an HWTACACS scheme by its
name, which is a string of 1 to 32 characters.
local: Performs local authentication.
none: Does not perform any authentication.
radius-scheme radius-scheme-name: Specifies a RADIUS scheme by its name, which
is a string of 1 to 32 characters.
Description
Use the authentication login command to specify the authentication scheme for login
users.
Use the undo authentication login command to restore the default.
By default, the default authentication scheme is used for login users.
Note that the RADIUS or HWTACACS scheme specified for the current ISP domain
must have been configured.
Related commands: authentication default, hwtacacs scheme, radius scheme.
Examples
# Configure the default ISP domain system to use the local authentication scheme for
login users.
<Sysname> system-view
[Sysname] domain system
[Sysname-isp-system] authentication login local
# Configure the default ISP domain system to use RADIUS authentication scheme rd
for login users and to use the local authentication scheme as the backup scheme.
<Sysname> system-view
[Sysname] domain system
[Sysname-isp-system] authentication login radius-scheme rd local
Chapter 1 AAA/RADIUS/HWTACACS
1-10
Configuration Commands