Qos Apply Policy Global - H3C S7500E Series Command Manual

Hide thumbs Also See for S7500E Series:

Table of Contents

Command Manual – QoS

H3C S7500E Series Ethernet Switches

2.3.7 qos apply policy global

qos apply policy policy-name global { inbound | outbound }

undo qos apply policy global { inbound | outbound }

policy-name: Policy name.

inbound: Applies the QoS policy to the incoming packets on all ports.

outbound: Applies the QoS policy to the outgoing packets on all ports.

Use the qos apply policy global command to apply a QoS policy globally. A QoS

policy applied globally takes effect on all inbound or outbound traffic depending on the

direction in which the policy is applied.

Use the undo qos apply policy global command to cancel the global application of

the QoS policy.

Note that, when you apply a QoS policy with the qos apply policy global command,

support for the inbound/outbound keyword depends on the actions defined in the

traffic behavior and LPU types, as described in

# Apply the QoS policy user1 in the inbound direction globally.

<Sysname> system-view

[Sysname] qos apply policy user1 global inbound

2.3.8 qos policy

qos policy policy-name

undo qos policy policy-name

policy-name: Name of the policy to be created.

Chapter 2 QoS Policy Configuration Commands

Table of Contents