Display Ipv6 Pathmtu - H3C S7500E Series Command Manual

Command Manual – IPv6 Configuration
H3C S7500E Series Ethernet Switches
Description
Use the display ipv6 neighbors count command to display the total number of
neighbor entries satisfying the specified condition.
Examples
# Display the total number of neighbor entries acquired dynamically.
<Sysname> display ipv6 neighbors dynamic count
Total dynamic entry(ies):

1.1.8 display ipv6 pathmtu

Syntax
display ipv6 pathmtu { ipv6-address | all | dynamic | static }
View
Any view
Parameters
ipv6-address: IPv6 address whose PMTU information is to be displayed.
all: Displays all PMTU information.
dynamic: Displays all dynamic PMTU information.
static: Displays all static PMTU information.
Description
Use the display ipv6 pathmtu command to display the PMTU information of IPv6
addresses.
Examples
# Display all PMTU information.
<Sysname> display ipv6 pathmtu all
IPv6 Destination Address
fe80::12
2222::3
Table 1-8 Description on fields of the display ipv6 pathmtu command
IPv6 Destination Address
ZoneID
PathMTU
2
ZoneID
0
0
Field
Destination IPv6 address
ID of address zone, currently invalid
PMTU of an IPv6 address
1-10
Chapter 1 IPv6 Basics Configuration Commands
PathMTU Age
1300 40
1280 -
Description
Type
Dynamic
Static