Display Dhcp Relay Security - H3C S7500E Series Command Manual

Command Manual – DHCP
H3C S7500E Series Ethernet Switches
Table 2-1 Description on fields of the display dhcp relay all command
Interface name
Server-group

2.1.14 display dhcp relay security

Syntax
display dhcp relay security [ ip-address | dynamic | static ]
View
Any view
Parameters
ip-address: Displays the binding information of an IP address.
dynamic: Displays information about dynamic bindings.
static: Displays information about static bindings.
Description
Use the display dhcp relay security command to display information about bindings
of DHCP relay agents. If no parameter is specified, information about all bindings will
be displayed.
Examples
# Display information about all bindings.
<Sysname> display dhcp relay security
IP Address
10.1.1.5
10.10.1.2
--- 2 dhcp-security item(s) found
Table 2-2 Description on fields of the display dhcp relay security command
Field
IP Address
MAC Address
Field
Interface name
DHCP server group number correlated to the interface.
MAC Address
00e0-0000-0000
0002-0002-0002
Client IP address
Client MAC address
Chapter 2 DHCP Relay Agent Configuration
Description
Type Interface
Static Vlan2
Static N/A
---
Description
2-11
Commands