Display Transceiver Manuinfo Interface - H3C S7500E Series Command Manual

Command Manual – System Maintaining and Debugging
H3C S7500E Series Ethernet Switches
Table 3-10 Description on the fields of the display transceiver interface command
transceiver information
Transceiver Type
Connector Type
Wavelength(nm)
Transfer distance(xx)
Digital Diagnostic
Monitoring
Vendor Name
Ordering Name

3.1.16 display transceiver manuinfo interface

Syntax
display transceiver manuinfo interface [ interface-type interface-number ]
Field
Transceiver information of the interface
Transceiver type
Type of the connectors of the transceiver:
Optical connectors, including SC (SC connector,
developed by NTT) and LC (LC connector, 1.25
mm/RJ45 optical connector developed by Lucent).
Other connectors, including RJ-45 and CX4.
Optical transceiver: central wavelength of the laser
sent, in nm. If the transceiver supports multiple
wavelengths, every two wavelength values are
separated by a comma.
Electrical transceiver: displayed as N/A.
Transfer distance, with xx representing km for
single-mode transceivers and m for other transceivers. If
the transceiver supports multiple transfer medium, every
two values of the transfer distance are separated by a
comma. The corresponding transfer medium is included
in the bracket following the transfer distance value. The
following are the transfer media:
9 um: 9/125 um single-mode fiber
50 um: 50/125 um multi-mode fiber
62.5 um: 62.5/125 um multi-mode fiber
TP: Twisted pair
CX4: CX4 cable
Whether the digital diagnosis function is supported,
where:
YES: supported
NO: not supported
Vendor name or vendor name specified of the
transceiver:
The anti-spoofing transceiver customized by H3C:
H3C is displayed.
Other transceivers: The original vendor name is
displayed.
Ordering name of the transceiver
Chapter 3 Device Management Commands
Description
3-18