Authentication Portal; Authorization Command - H3C S7500E Series Command Manual

Command Manual – AAA RADIUS HWTACACS
H3C S7500E Series Ethernet Switches

1.1.11 authentication portal

Syntax
authentication portal { none | radius-scheme radius-scheme-name }
undo authentication portal
View
ISP domain view
Parameters
none: Does not perform any authentication.
radius-scheme radius-scheme-name: Specifies a RADIUS scheme by its name, which
is a string of 1 to 32 characters.
Description
Use the authentication portal command to specify the authentication scheme for
portal users.
Use the undo authentication portal command to restore the default.
By default, the default authentication scheme is used for portal users.
Note that the RADIUS scheme specified for the current ISP domain must have been
configured.
Related commands: authentication default, radius scheme.
Examples
# In the default ISP domain system, specify the authentication scheme for portal users
to RADIUS scheme, with the name rd.
<Sysname> system-view
[Sysname] domain system
[Sysname-isp-system] authentication portal radius-scheme rd

1.1.12 authorization command

Syntax
authorization command hwtacacs-scheme hwtacacs-scheme-name
undo authorization command
View
ISP domain view
Chapter 1 AAA/RADIUS/HWTACACS
1-11
Configuration Commands