Display Arp Suppression Vsi - H3C CR16000-F Command Reference Manual

Related commands
display l2vpn vsi

display arp suppression vsi

Use display arp suppression vsi to display ARP flood suppression entries.
Syntax
In standalone mode:
display arp suppression vsi [ name vsi-name ] [ slot slot-number ] [ count ]
In IRF mode:
display arp suppression vsi [ name vsi-name ] [ chassis chassis-number slot
slot-number ] [ count ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
name vsi-name : Specifies a VSI by its name. If you do not specify a VSI, this command displays
entries for all VSIs.
slot slot-number : Specifies a card by its slot number. If you do not specify a card, this command
displays entries on the active MPU. (In standalone mode.)
chassis chassis-number slot slot-number : Specifies a card on an IRF member device.
The chassis-number argument represents the IRF member ID. The slot-number argument
represents the slot number of the card. If you do not specify a card, this command displays entries on
the global active MPU. (In IRF mode.)
count : Displays the number of ARP flood suppression entries that match the command.
Examples
# Display ARP flood suppression entries.
<Sysname> display arp suppression vsi
IP address
1.1.1.2
1.1.1.3
1.1.1.4
# Display the number of ARP flood suppression entries.
<Sysname> display arp suppression vsi count
Total entries: 3
Table 1 Command output
Field
Link ID
Aging
MAC address Vsi Name
000f-e201-0101 vsi1
000f-e201-0202 vsi1
000f-e201-0203 vsi2
Description
Link ID that uniquely identifies an AC or a VXLAN tunnel on a VSI.
Remaining lifetime (in minutes) of the ARP flood suppression entry. When
the timer expires, the entry is deleted.
3
Link ID Aging
0x70000 14
0x80000 18
0x90000 10