Rmon Configuration Commands; Display Rmon Alarm; Chapter 2 Rmon Configuration Commands - H3C S7500E Series Command Manual

Command Manual – SNMP-RMON
H3C S7500E Series Ethernet Switches

Chapter 2 RMON Configuration Commands

2.1 RMON Configuration Commands

2.1.1 display rmon alarm

Syntax
display rmon alarm [ entry-number ]
View
Any view
Parameters
entry-number: Index of an RMON alarm entry, in the range 1 to 65535. If no entry is
specified, the configuration of all alarm entries is displayed.
Description
Use the display rmon alarm command to display the configuration of the specified or
all RMON alarm entries.
Related commands: rmon alarm.
Examples
# Display the configuration of all RMON alarm table entries.
<Sysname> display rmon alarm
Alarm table 1 owned by user1 is VALID.
Samples type
Variable formula
Sampling interval
Rising threshold
Falling threshold
When startup enables
Latest value
Table 2-1 Description on the fields of the display rmon alarm command
Alarm table
owned by
: absolute
: 1.3.6.1.2.1.16.1.1.1.4.1<etherStatsOctets.1>
: 10(sec)
: 50(linked with event 1)
: 5(linked with event 2)
: risingOrFallingAlarm
: 0
Field
Alarm entry index, 1 in this example
Owner of the entry, user1 in this example
Chapter 2 RMON Configuration Commands
Description
2-1