H3C S7500E Series Command Manual page 843

Command Manual – Multicast
H3C S7500E Series Ethernet Switches
View
Any view
Parameters
group-address: Multicast group address in the (S, G) entry, in the range of 224.0.1.0 to
239.255.255.255.
source-address: Multicast source address in the (S, G) entry.
as-number: AS number, in the range of 1 to 65535.
Description
Use the display msdp sa-cache command to view the information of (S, G) entries in
the MSDP cache.
Note that:
This command gives the corresponding output only after the cache-sa-enable
command is executed.
If you do not provide a source address, this command will display the information
of all sources in the specified multicast group.
If you do not provide a group address and a source address, this command will
display the information of all cached entries.
If you do not provide an AS number, this command will display the information
related to all ASs.
Related commands: cache-sa-enable.
Examples
# View the information of (S, G) entries in the MSDP cache.
<Sysname> display msdp sa-cache
MSDP Total Source-Active Cache - 5 entries
(Source, Group)
(10.10.1.2, 225.1.1.1)
(10.10.1.3, 225.1.1.1)
(10.10.1.2, 225.1.1.2)
(10.10.2.1, 225.1.1.2)
(10.10.1.2, 225.1.2.2)
MSDP matched 5 entries
Chapter 5 MSDP Configuration Commands
Origin RP Pro
10.10.10.10 BGP 100
10.10.10.10 BGP 100
10.10.10.10 BGP 100
10.10.10.10 BGP 100
10.10.10.10 BGP 100
5-6
AS Uptime Expires
00:00:10 00:05:50
00:00:11 00:05:49
00:00:11 00:05:49
00:00:11 00:05:49
00:00:11 00:05:49