H3C S7500E Series Command Manual page 970

Command Manual – AAA RADIUS HWTACACS
H3C S7500E Series Ethernet Switches
Parameters
hwtacacs-scheme-name: HWTACACS scheme name.
statistics: Displays complete statistics about the HWTACACS server.
slot slot-number: Specifies the slot where the interface card is inserted.
Description
Use the display hwtacacs command to display configuration information or statistics
of the specified or all HWTACACS schemes.
Note that:
If no HWTACACS scheme is specified, the command will display the configuration
information of all HWTACACS schemes.
If no slot number is specified, the command will display the configuration
information of the HWTACACS scheme on the main processing unit (MPU).
Related commands: hwtacacs scheme.
Examples
# Display configuration information about HWTACACS scheme gy.
<Sysname> display hwtacacs gy
--------------------------------------------------------------------
HWTACACS-server template name
Primary-authentication-server
Primary-authorization-server
Primary-accounting-server
Secondary-authentication-server
Secondary-authorization-server
Secondary-accounting-server
Current-authentication-server
Current-authorization-server
Current-accounting-server
NAS-IP-address
key authentication
key authorization
key accounting
Quiet-interval(min)
Realtime-accounting-interval(min) : 12
Response-timeout-interval(sec)
Acct-stop-PKT retransmit times
Domain-included
Data traffic-unit
Packet traffic-unit
Chapter 1 AAA/RADIUS/HWTACACS
: gy
: 172.31.1.11:49
: 172.31.1.11:49
: 172.31.1.11:49
: 0.0.0.0:0
: 0.0.0.0:0
: 0.0.0.0:0
: 172.31.1.11:49
: 172.31.1.11:49
: 172.31.1.11:49
: 0.0.0.0
: 790131
: 790131
: 790131
: 5
: 5
: 100
: Yes
: B
: one-packet
1-61
Configuration Commands