Public-Key-Code End - H3C S7500E Series Command Manual

Command Manual – SSH
H3C S7500E Series Ethernet Switches
Description
Use the public-key-code begin command to enter RSA key code view.
After entering public key code view, you can input the key data. It must be a
hexadecimal string that is generated randomly by the SSH-supported client software
and coded compliant to PKCS.
Related commands: public-key peer, public-key-code end.
Examples
# Enter public key code view to input the key.
<Sysname> system-view
[Sysname] public-key peer key1
[Sysname-pkey-public-key] public-key-code begin
[Sysname-pkey-key-code]30819F300D06092A864886F70D010101050003818D003081890
2818100C0EC8014F82515F6335A0A
[Sysname-pkey-key-code]EF8F999C01EC94E5760A079BD73E4F4D97F3500EDB308C29481
B77E719D1643135877E13B1C531B4
[Sysname-pkey-key-code]FF1877A5E2E7B1FA4710DB0744F66F6600EEFE166F1B854E237
1D5B952ADF6B80EB5F52698FCF3D6
[Sysname-pkey-key-code]1F0C2EAAD9813ECB16C5C7DC09812D4EE3E9A0B074276FFD4AF
2050BD4A9B1DDE675AC30CB020301
[Sysname-pkey-key-code]0001

1.1.10 public-key-code end

Syntax
public-key-code end
View
RSA key code view
Parameters
None
Description
Use the public-key-code end command to return from public key code view to public
key view and to save the configured public key.
The system verifies the key before saving it. If the key contains illegal characters, the
system displays an error message and discards the key. If the key is legal, the system
saves it.
Related commands: public-key peer, public-key-code begin.
Chapter 1 SSH Configuration Commands
1-9