Rmon Statistics - H3C S7500E Series Command Manual

Hide thumbs Also See for S7500E Series:

Table of Contents

Command Manual – SNMP-RMON

H3C S7500E Series Ethernet Switches

intervals of 10 seconds to get the percentage of broadcasts received on Ethernet 2/0/1

in the total packets. When this ratio reaches or is bigger than the rising threshold of 50,

trigger event 1; when this ratio reaches or drops under the falling threshold, trigger

event 2. Set the lifetime of the entry to forever and owner to user 1.

<Sysname> system-view

[Sysname] rmon event 1 log

[Sysname] rmon event 2 none

[Sysname] interface Ethernet 2/0/1

[Sysname-Ethernet 2/0/1] rmon statistics 1

[Sysname-Ethernet 2/0/1] quit

[Sysname] rmon prialarm 5 ((.1.3.6.1.2.1.16.1.1.1.4.1)*100) Test 10 absolute

rising-threshold 50 1 falling-threshold 5 2 entrytype forever owner user1

# Remove private alarm entry 10.

<Sysname> system-view

[Sysname] undo rmon prialarm 10

2.1.11 rmon statistics

rmon statistics entry-number [ owner text ]

undo rmon statistics entry-number

Ethernet port view

entry-number: Index of statistics entry, in the range 1 to 65535.

owner text: Owner of the entry, a string of 1 to 127 characters. It is case sensitive and

space is supported.

Use the rmon statistics command to create an entry in the RMON statistics table.

Use the undo rmon statistics command to remove a specified entry from the RMON

statistics table.

The RMON statistics group collects information on how a monitored port is being used

and records errors. Statistics include number of collisions, CRC alignment errors,

number of undersize or oversize packets, number of broadcasts, number of multicasts,

number of bytes received, number of packets received.

Chapter 2 RMON Configuration Commands

Table of Contents