Command Manual – AAA RADIUS HWTACACS
H3C S7500E Series Ethernet Switches
1.3 HWTACACS Configuration Commands
1.3.1 data-flow-format
Syntax
data-flow-format { data { byte | giga-byte | kilo-byte | mega-byte } | packet
{ giga-packet | kilo-packet | mega-packet | one-packet } }*
undo data-flow-format { data | packet }
View
HWTACACS scheme view
Parameters
data: Specifies the unit for data flows, which can be byte, kilobyte, megabyte, or
gigabyte.
packet: Specifies the unit for data packets, which can be one-packet, kilo-packet,
mega-packet, or giga-packet.
Description
Use the data-flow-format command to specify the unit for data flows or packets to be
sent to a HWTACACS server.
Use the undo data-flow-format command to restore the default.
By default, the unit for data flows is byte and that for data packets is one-packet.
Related commands: display hwtacacs.
Examples
# Define HWTACACS scheme hwt1 to send data flows and packets destined for the
TACACS server in kilobytes and kilo-packets.
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname- hwtacacs-hwt1] data-flow-format data kilo-byte packet kilo-packet
1.3.2 display hwtacacs
Syntax
display hwtacacs [ hwtacacs-scheme-name [ statistics ] ] [ slot slot-number ]
View
Any view
Chapter 1 AAA/RADIUS/HWTACACS
1-60
Configuration Commands