Display Udp Ipv6 Statistics - H3C S7500E Series Command Manual

Command Manual – IPv6 Configuration
H3C S7500E Series Ethernet Switches
State

1.1.13 display udp ipv6 statistics

Syntax
display udp ipv6 statistics
View
Any view
Parameters
None
Description
Use the display udp ipv6 statistics command to display statistics of IPv6 UDP
packets.
Examples
# Display statistics information of IPv6 UDP packets.
<Sysname> display udp ipv6 statistics
Received packets:
Total: 0
checksum error: 0
shorter than header: 0, data length larger than packet: 0
unicast(no socket on port): 0
broadcast/multicast(no socket on port): 0
not delivered, input socket full: 0
input packets missing pcb cache: 0
Sent packets:
Total: 0
Field
IPv6 TCP connection status, including
Closed
Listening
Syn_Sent
Syn_Rcvd
Established
Close_Wait
Fin_Wait1
Closing
Last_Ack
Fin_Wait2
Time_Wait
Chapter 1 IPv6 Basics Configuration Commands
Description
1-21