H3C S7500E Series Command Manual page 1275

Command Manual – File System Management
H3C S7500E Series Ethernet Switches
Trying 192.168.1.46 ...
Press CTRL+K to abort
Connected to 192.168.1.46.
220 FTP service ready.
User(192.168.1.46:(none)):ftp
331 Password required for ftp.
Password:
230 User logged in.
[ftp]undo passive
[ftp] debugging
[ftp] get sample.file
---> PORT 192,168,1,44,4,21
200 Port command okay.
The parsed reply is 200
---> RETR sample.file
150 Opening ASCII mode data connection for /sample.file.
The parsed reply is 150
FTPC: File transfer started with the signal light turned on.
FTPC: File transfer completed with the signal light turned off.
.226 Transfer complete.
FTP: 3304 byte(s) received in 4.889 second(s), 675.00 byte(s)/sec.
[ftp]
Table 2-2 debugging command output description
The parsed reply is
FTPC: File transfer started with the
signal light turned on.
FTPC: File transfer completed with the
signal light turned off.
2.2.8 delete
Syntax
delete remotefile
Field
2-9
Chapter 2 FTP Configuration Commands
Description
The received reply code, which is
defined in RFC 959.
File transfer starts, and the signal light is
turned on.
File transfer is completed, and the signal
light is turned off.