H3C S7500E Series Command Manual page 1142

Command Manual – QoS
H3C S7500E Series Ethernet Switches
Parameters
name policy-name: Specifies to display the information about the VLAN policy with the
specified name.
vlan vlan-id: Specifies to display the information about the VLAN policy applied to the
specified VLAN.
slot-id: Specifies to display the information about the VLAN policies applied to VLANs
on the board seated in the specific slot. If the slot-id argument is not specified, this
command displays the information about the VLAN policies applied to the SRPU.
Description
Use the display qos vlan-policy command to display the information about VLAN
policies.
If the vlan-id argument is not specified, the information about all the VLAN policies will
be displayed.
Examples
# Display the information about the VLAN policy named test.
<Sysname> display qos vlan-policy name test
Policy test
Vlan 300: inbound
Table 2-8 Description on the fields of the display qos vlan-policy command
Policy
Vlan 300
inbound
# Display the information about the VLAN policy applied to VLAN 300.
<Sysname> display qos vlan-policy vlan 300
Vlan 300
Direction: Inbound
Policy: test
Classifier: test
Operator: AND
Rule(s) : If-match customer-vlan-id 3
Behavior: test
Field
Name of the VLAN policy
ID of the VLAN where the VLAN policy is applied
VLAN policy is applied in the inbound direction of the VLAN.
Chapter 2 QoS Policy Configuration Commands
Description
2-23