Command Manual – Multicast
H3C S7500E Series Ethernet Switches
Examples
# Set the router priority for DR election to 3.
<Sysname> system-view
[Sysname] pim
[Sysname-pim] hello-option dr-priority 3
4.1.25 hello-option holdtime
Syntax
hello-option holdtime interval
undo hello-option holdtime
View
PIM view
Parameters
interval: PIM neighbor timeout time in seconds, with an effective range of 1 to 65,535.
Description
Use the hello-option holdtime command to configure the PIM neighbor timeout time.
Use the undo hello-option holdtime command to restore the system default.
By default, the PIM neighbor timeout time is 105 seconds.
This command is effective for both PIM-DM and PIM-SM.
Related commands: pim hello-option holdtime.
Examples
# Set the global value of the PIM neighbor timeout time to 120 seconds.
<Sysname> system-view
[Sysname] pim
[Sysname-pim] hello-option holdtime 120
4.1.26 hello-option lan-delay
Syntax
hello-option lan-delay interval
undo hello-option lan-delay
View
PIM view
Chapter 4 PIM Configuration Commands
4-28