H3C S7500E Series Command Manual page 1203

Command Manual – SNMP-RMON
H3C S7500E Series Ethernet Switches
Description
Use the display rmon history command to display RMON history control entry and
last history sampling information, including bandwidth utilization, number of bad
packets, and total packet number.
Related commands: rmon history.
Examples
# Display RMON history entry information for interface Ethernet 2/0/1.
<Sysname> display rmon history Ethernet 2/0/1
History control entry 1 owned by user1 is VALID
Samples interface
Sampling interval
Latest sampled values :
Dropevents
packets
multicast packets :0
undersize packets :0
fragments
collisions
Table 2-4 Description on the fields of the display rmon history command
History control entry
owned by
VALID
Samples Interface
Sampling interval
buckets max
Latest sampled values
Dropevents
octets
packets
: Ethernet 2/0/1<ifEntry.642>
: 10(sec) with 10 buckets max
:0
:0
:0
:0
Field
Index of the history control entry for the interface, 1 in
this example
Owner of the entry
Status of the entry identified by the index (VALID means
the entry is valid, and UNDERCREATION means
invalid. You can use the display rmon command to
view the invalid entry and with the display
current-configuration and display this commands
you cannot view the corresponding rmon commands.)
The sampled interface
Sampling interval
History table size for the entry, if the specified value of
the buckets argument exceeds the history table size
supported by the device the latter is displayed.
The latest sampled values
Dropped packets during the sampling period
Number of octets received during the sampling period
Number of packets received during the sampling period
Chapter 2 RMON Configuration Commands
, octets
, broadcast packets
, CRC alignment errors :0
, oversize packets
, jabbers
, utilization
Description
2-5
:0
:0
:0
:0
:0