Display Radius Statistics - H3C S7500E Series Command Manual

Command Manual – AAA RADIUS HWTACACS
H3C S7500E Series Ethernet Switches
Quiet-interval(min)
Username format
Data flow unit
Packet unit
Total 1 RADIUS scheme(s)

1.2.3 display radius statistics

Syntax
display radius statistics [ slot slot-number ]
View
Any view
Parameters
slot slot-number: Specifies the slot where the interface card is inserted.
Description
Use the display radius statistics command to display statistics about RADIUS
packets.
Related commands: radius scheme.
Examples
# Display statistics about RADIUS packets.
<Sysname> display radius statistics
Slot 0:state statistic(total=4096):
DEAD = 4096
AcctStart = 0
AcctStop = 0
Received and Sent packets statistic:
Sent PKT total
RADIUS received packets statistic:
Code =
Code =
Code =
Code = 11
Field
AuthProc = 0
RLTSend = 0
OnLine = 0
= 0
2 Num = 0
3 Num = 0
5 Num = 0
Num = 0
Chapter 1 AAA/RADIUS/HWTACACS
Quiet interval for the primary server
Format of the username
Unit of data flows
Unit of packets
1 RADIUS scheme in total
AuthSucc = 0
RLTWait = 0
Stop = 0
Received PKT total = 0
Err = 0
Err = 0
Err = 0
Err = 0
1-35
Configuration Commands
Description