Hello-Option Dr-Priority - H3C S7500E Series Command Manual

Command Manual – Multicast
H3C S7500E Series Ethernet Switches
Uptime: 03:01:36
Expires: 00:02:29
Table 4-10 Description on the fields of the display pim rp-info command
BSR RP Address is
Group/MaskLen
RP
Priority
HoldTime
Uptime
Expires
RP mapping for this group
is: 2.2.2.2

4.1.24 hello-option dr-priority

Syntax
hello-option dr-priority priority
undo hello-option dr-priority
View
PIM view
Parameters
priority: Router priority for DR election, in the range of 0 to 4294967295. A larger value
of this argument means a higher priority.
Description
Use the hello-option dr-priority command to configure the global value of the router
priority for DR election.
Use the undo hello-option dr-priority command to restore the system default.
By default, the router priority for DR election is 1.
Related commands: pim hello-option dr-priority.
Field
IP address of the BSR RP
The multicast group served by the RP
IP address of the RP
RP priority
RP timeout time
Length of time for which the RP has been up, in
hours:minutes:seconds
Length of time in which the RP will expire, in
hours:minutes:seconds
The IP address of the RP serving the current
multicast group is 2.2.2.2
Chapter 4 PIM Configuration Commands
Description
4-27