Display Ntp-Service Status - H3C S7500E Series Command Manual

Command Manual – NTP
H3C S7500E Series Ethernet Switches
Note:
When a device is working in the NTP broadcast/multicast server mode, the display
ntp-service sessions command executed on the device will not display the NTP session
information corresponding to the broadcast/multicast server, but the sessions will be
counted in the total number of associations.

1.1.2 display ntp-service status

Syntax
display ntp-service status
View
Any view
Parameters
None
Description
Use the display ntp-service status command to view the NTP service status
information.
Examples
# View the NTP service status information.
<Sysname> display ntp-service status
Clock status: unsynchronized
Clock stratum: 16
Reference clock ID: none
Nominal frequency: 100.0000 Hz
Actual frequency: 100.0000 Hz
Clock precision: 2^17
Clock offset: 0.0000 ms
Root delay: 0.00 ms
Root dispersion: 0.00 ms
Peer dispersion: 0.00 ms
Reference time: 00:00:00.000 UTC Jan 1 1900(00000000.00000000)
Chapter 1 NTP Configuration Commands
1-3