Qos Sp; Qos Wrr - H3C S7500E Series Command Manual

Command Manual – QoS
H3C S7500E Series Ethernet Switches

3.1.3 qos sp

Syntax
qos sp
undo qos sp
View
Ethernet interface view, port group view
Parameters
None
Description
Use the qos sp command to configure SP queuing on the current port.
Use the undo qos sp command to restore the default queuing algorithm on the port.
By default, the switch adopts the SP queue-scheduling algorithm.
Related commands: display qos sp interface.
Examples
# Configure SP queuing on Ethernet 2/0/1.
<H3C> system-view
[H3C] interface Ethernet 2/0/1
[H3C-Ethernet2/0/1] qos sp

3.1.4 qos wrr

Syntax
qos wrr queue-id group { sp | group-id weight queue-weight }
undo qos wrr
View
Ethernet interface view, port group view
Parameters
queue-id: ID of the queue, in the range of 0 to 7.
group-id: It can only be 1.
weight schedule-value: Specifies the scheduling weight of a queue, rang from 1 to 15.
sp: Configures SP queuing.
Chapter 3 Congestion Management Configuration
3-3
Commands