H3C S7500E Series Command Manual page 590

Command Manual – IPv6 Routing
H3C S7500E Series Ethernet Switches
Examples
# Display IPv6 IS-IS routing information.
<Sysname> display isis route ipv6
Destination: 2001::
Flag
Next Hop
Destination: 2002::
Flag
Next Hop
Flags: R-Added to RM, L-Advertised in LSPs, U-Up/Down Bit Set
Table 4-1 Description on the fields of the display isis route ipv6 command
Field
Destination
PrefixLen
Flag/Flags
Cost
Next Hop
Interface
# Display detailed IPv6 IS-IS routing information.
<Sysname> display isis route ipv6 verbose
IPV6 Dest
Preference : 15
Route information for ISIS(1)
-----------------------------
ISIS(1) IPv6 Level-1 Forwarding Table
-------------------------------------
: R/L/-
: Direct
: R/L/-
: FE80::20F:E2FF:FE1D:A65B
IPv6 destination address prefix
Length of the prefix
Flag of routing information status
D: This is a direct route.
R: The route has been added into the routing table.
L: The route has been advertised in an LSP.
U: Route leaking flag, indicating the Level-1 route is from
Level-2. "UP" means the route will not be returned to Level-2.
Value of cost
Next hop
Outbound interface
Route information for ISIS(1)
-----------------------------
ISIS(1) IPv6 Level-1 Forwarding Table
-------------------------------------
: 2001:1::/64
4-2
Chapter 4 IPv6 IS-IS Configuration Commands
PrefixLen: 64
Cost
Interface: Vlan100
PrefixLen: 64
Cost
Interface: Vlan100
Description
Cost : 10
Admin Tag : -
: 10
: 20
Flag : R/L/-