Reboot - H3C S7500E Series Command Manual

Command Manual – System Maintaining and Debugging
H3C S7500E Series Ethernet Switches
View
Any view
Parameters
interface-type interface-number: Interface type and interface number.
Description
Use the display transceiver manuinfo interface command to display part of the
electrical label information of a single or all anti-spoofing pluggable transceivers
customized by H3C.
Examples
# Display part of the electrical label information of the anti-spoofing pluggable
transceiver customized by H3C on interface GigabitEthernet 2/0/4.
<Sysname> display transceiver manuinfo interface gigabitethernet 2/0/4
GigabitEthernet2/0/4 transceiver manufacture information:
Manu. Serial Number
Manufacturing Date
Vendor Name
Table 3-11 Description on the fields of display transceiver manuinfo interface
Manu. Serial Number
Manufacturing Date
Vendor Name

3.1.17 reboot

Syntax
reboot
View
User view
Parameters
None
: 213410A0000054000251
: 2007-07-28
: H3C
Field
Serial number generated during debugging and testing
Debugging and testing date.. The date takes the value
of the system clock of the computer that performs
debugging and testing.
Vendor name specified, that is, H3C.
Chapter 3 Device Management Commands
Description
3-19