Display Arp Ip-Address - H3C S5120-SI Series Command Reference Manual

Field
MAC Address
VLAN ID
Interface
Aging
Type
# Display the number of all ARP entries.
<Sysname> display arp all count
Total Entry(ies): 2

display arp ip-address

Syntax
display arp ip-address [ | { begin | exclude | include } regular-expression ]
View
Any view
Default Level
1: Monitor level
Parameters
ip-address: Displays the ARP entry for the specified IP address.
|: Uses a regular expression to specify the ARP entries to be displayed. For detailed information about
regular expressions, refer to Basic System Configuration.
begin: Displays the ARP entries from the first one containing the specified string.
exclude: Displays the ARP entries that do not contain the specified string.
include: Displays the ARP entries that contain the specified string.
regular-expression: A case-sensitive string for matching, consisting of 1 to 256 characters.
Description
Use the display arp ip-address command to display the ARP entry for a specified IP address.
Related commands: arp static, reset arp.
Examples
# Display the corresponding ARP entry for the IP address 20.1.1.1.
<Sysname> display arp 20.1.1.1
IP Address
20.1.1.1
MAC address in an ARP entry
VLAN ID contained a static ARP entry
Outbound interface in an ARP entry
Aging time for a dynamic ARP entry in minutes ("N/A" means unknown
aging time or no aging time)
ARP entry type: D for dynamic, S for static.
Type: S-Static D-Dynamic
MAC Address VLAN ID
00e0-fc00-0001 N/A
Description
Interface
N/A
1-5
Aging Type
N/A S