H3C S7500E Series Command Manual page 629

Command Manual – IPv6 Routing
H3C S7500E Series Ethernet Switches
5.1.32 peer advertise-ext-community
Syntax
peer { ipv6-group-name | ipv6-address } advertise-ext-community
undo peer { ipv6-group-name | ipv6-address } advertise-ext-community
View
IPv6 address family view
Parameters
ipv6-group-name: Name of an IPv6 peer group, a string of 1 to 47 characters.
ipv6-address: IPv6 address of a peer.
Description
Use the peer advertise-ext-community command to advertise the extended
community attribute to a peer/peer group.
Use the undo peer advertise-ext-community command to remove the configuration.
By default, no extended community attribute is advertised to a peer/peer group.
Examples
# Advertise the extended community attribute to the peer 1:2::3:4.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] peer 1:2::3:4 advertise-ext-community
5.1.33 peer allow-as-loop
Syntax
peer { ipv6-group-name | ipv6-address } allow-as-loop [ number ]
undo peer { ipv6-group-name | ipv6-address } allow-as-loop
View
IPv6 address family view
Parameters
ipv6-group-name: Name of an IPv6 peer group, a string of 1 to 47 characters.
ipv6-address: IPv6 address of a peer.
number: Specifies the repeating times of the local AS number, in the range 1 to 10. The
default number is 1.
Chapter 5 IPv6 BGP Configuration Commands
5-29