H3C S7500E Series Command Manual page 806

Command Manual – Multicast
H3C S7500E Series Ethernet Switches
outgoing-interface: Displays routing entries of which the outgoing interface is the
specified interface.
include: Displays routing entries of which the outgoing interface list includes the
specified interface.
exclude: Displays routing entries of which the outgoing interface list excludes the
specified interface.
match: Displays routing entries of which the outgoing interface list includes only the
specified interface.
mode mode-type: Specifies a PIM mode, where mode-type can have the following
values:
dm: Specifies PIM-DM.
sm: Specifies PIM-SM.
ssm: Specifies PIM-SSM.
flags flag-value: Displays routing entries containing the specified flag(s). The values of
flag-value and their meanings are as follows:
2msdp: Specifies routing entries to be contained in the next SA message to notify
an MSDP peer.
act: Specifies multicast routing entries to which actual data has arrived.
del: Specifies multicast routing entries scheduled to be deleted.
exprune: Specifies multicast routing entries containing outgoing interfaces pruned
by other multicast routing protocols.
ext: Specifies routing entries containing outgoing interfaces contributed by other
multicast routing protocols.
loc: Specifies multicast routing entries on routers directly connecting to the same
subnet with the multicast source.
msdp: Specifies routing entries learned from MSDP SA messages.
niif: Specifies multicast routing entries containing unknown incoming interfaces.
nonbr: Specifies routing entries with PIM neighbor searching failure.
rpt: Specifies routing entries on RPT branches where (S, G) prunes have been
sent to the RP.
spt: Specifies routing entries on the SPT.
swt: Specifies routing entries in the process of RPT-to-SPT switchover.
wc: Specifies wildcard routing entries.
fsm: Displays the detailed information of the finite state machine (FSM).
Description
Use the display pim routing-table command to view PIM routing table information.
Examples
# View the content of the PIM routing table.
Chapter 4 PIM Configuration Commands
4-24