Hello-Option Neighbor-Tracking - H3C S7500E Series Command Manual

Command Manual – Multicast
H3C S7500E Series Ethernet Switches
Parameters
interval: LAN-delay time in milliseconds, with an effective range of 1 to 32,767.
Description
Use the hello-option lan-delay command to configure the global value of the
LAN-delay time, namely the length of time the device waits between receiving a prune
message from downstream and taking the prune action. Within this period of time, if the
device receives a prune override message from that downstream device, the prune
action will be overridden.
Use the undo hello-option lan-delay command to restore the system default.
By default, the LAN-delay time is 500 milliseconds.
This command is effective for both PIM-DM and PIM-SM.
Related
override-interval, pim hello-option lan-delay.
Examples
# Set the LAN-delay time to 200 milliseconds globally.
<Sysname> system-view
[Sysname] pim
[Sysname-pim] hello-option lan-delay 200

4.1.27 hello-option neighbor-tracking

Syntax
hello-option neighbor-tracking
undo hello-option neighbor-tracking
View
PIM view
Parameters
None
Description
Use the hello-option neighbor-tracking command to globally disable join
suppression, namely enable neighbor tracking.
Use the undo hello-option neighbor-tracking command to enable join suppression.
By default, join suppression is enabled, namely neighbor tracking is disabled.
This command is effective for both PIM-DM and PIM-SM.
commands: hello-option
Chapter 4 PIM Configuration Commands
override-interval,
4-29
pim hello-option