Display Multicast Routing-Table - H3C S7500E Series Command Manual

Command Manual – Multicast
H3C S7500E Series Ethernet Switches
Incoming interface
List of 1 outgoing
interface:
1: Vlan-interface2
Matched 38264 packets
(1071392 bytes), Wrong
If 0 packets
Forwarded 18696
packets (523488 bytes)
Table 6-3 Major values of the flags field
0x00000001
0x00000002
0x00000004
0x00000008
0x00000010
0x00000400
0x00008000
0x00010000
0x00080000
0x00100000

6.1.3 display multicast routing-table

Syntax
display multicast routing-table [ source-address [ mask { mask | mask-length } ] |
group-address [ mask { mask | mask-length } ] | incoming-interface { interface-type
interface-number | register } | outgoing-interface { { exclude | include | match }
{ interface-type interface-number | register } } ] *
View
Any view
Field
Incoming interface of the (S, G) entry
Outgoing interface list
Interface number: outgoing interface name and number
(S, G)-matched packets (bytes), packets with incoming
interface errors
(S, G)-forwarded packets (bytes)
Value
Indicates that a register-stop message must be sent
Indicates whether the multicast source corresponding to the
(S, G) is active
Indicates a null forwarding entry
Indicates whether the RP is a PIM domain border router
Indicates that a register outgoing interface is available
Identifies a packet to be deleted
Indicates that the (S, G) entry is in the smoothening process
after active/standby switchover
Indicates that the (S, G) has been updated during the
smoothing process
Indicates that the (S, G) entry has been repeatedly updated
and needs to be deleted before a new entry is added
Indicates that an entry is successfully added
Chapter 6 Multicast Routing and Forwarding
Description
Meaning
6-4
Configuration Commands