H3C S7500E Series Command Manual page 841

Command Manual – Multicast
H3C S7500E Series Ethernet Switches
Number of discarded output messages: 0
Elapsed time since last connection or counters clear: 14:42:40
Information about (Source, Group)-based SA filtering policy:
Import policy: none
Export policy: none
Information about SA-Requests:
Policy to accept SA-Request messages: none
Sending SA-Requests status: disable
Minimum TTL to forward SA with encapsulated data: 0
SAs learned from this peer: 0, SA-cache maximum for the peer: none
Input queue size: 0, Output queue size: 0
Counters for MSDP message:
Count of RPF check failure: 0
Incoming/outgoing SA messages: 0/0
Incoming/outgoing SA requests: 0/0
Incoming/outgoing SA responses: 0/0
Incoming/outgoing data packets: 0/0
Table 5-2 Description on the fields of the display msdp peer-status command
MSDP Peer
AS
State
Resets
Up/Down time
Connection interface
Number of sent/received
messages
Number of discarded
output messages
Field
MSDP peer address
Number of the AS where the MSDP peer is located. "?"
indicates that the system was unable to obtain the AS
number.
MSDP peer status:
Up: Session set up; MSDP peer in session
Listen: Session set up; local device as server, in
listening state
Connect: Session not set up; local device as client,
in connecting state
Shutdown: Deactivated
Down: Connection failed
Number of times the MSDP peer connection is reset
Length of time since MSDP peer connection was
established/failed
Interface and its IP address used for setting up a TCP
connection with the remote MSDP peer
Number of SA messages sent and received through this
connection
Number of discarded outgoing messages
Chapter 5 MSDP Configuration Commands
Description
5-4