Accounting Portal - H3C S7500E Series Command Manual

Command Manual – AAA RADIUS HWTACACS
H3C S7500E Series Ethernet Switches

1.1.6 accounting portal

Syntax
accounting portal { none | radius-scheme radius-scheme-name }
undo accounting portal
View
ISP domain view
Parameters
none: Does not perform any accounting.
radius-scheme radius-scheme-name: Specifies a RADIUS scheme by its name, which
is a string of 1 to 32 characters.
Description
Use the accounting portal command to specify the accounting scheme for portal
users.
Use the undo accounting portal command to restore the default.
By default, the default accounting scheme is used for portal users.
Note that the RADIUS scheme specified for the current ISP domain must have been
configured.
Related commands: accounting default, radius scheme.
Examples
# In the default ISP domain system, specify the accounting scheme for portal users to
RADIUS scheme, with the name rd.
<Sysname> system-view
[Sysname] domain system
[Sysname-isp-system] accounting portal radius-scheme rd
1.1.7 attribute
Syntax
attribute { access-limit max-user-number | idle-cut minute | ip ip-address | location
{ [ nas-ip ip-address ] port slot-number subslot-number port-number } | mac
mac-address | vlan vlan-id } *
undo attribute { access-limit | idle-cut | ip | location | mac |vlan } *
View
Local user view
Chapter 1 AAA/RADIUS/HWTACACS
1-6
Configuration Commands