Static-Bind Mac-Address - H3C S7500E Series Command Manual

Command Manual – DHCP
H3C S7500E Series Ethernet Switches
Note that:
Use the static-bind ip-address command together with the static-bind
mac-address or static-bind client-identifier command to accomplish a static
binding configuration.
If the statically bound IP address is an interface address of the DHCP server, the
static binding does not take effect.
If you use the static-bind ip-address command repeatedly, the latest
configuration will overwrite the previous one.
Related commands: dhcp server ip-pool, static-bind client-identifier, static-bind
mac-address.
Examples
# Bind the client MAC address 0000-e03f-0305 to the IP address 10.1.1.1 with the
mask 255.255.255.0 in DHCP address pool 0.
<Sysname> system-view
[Sysname] dhcp server ip-pool 0
[Sysname-dhcp-pool-0] static-bind ip-address 10.1.1.1 mask 255.255.255.0
[Sysname-dhcp-pool-0] static-bind mac-address 0000-e03f-0305

1.1.31 static-bind mac-address

Syntax
static-bind mac-address mac-address
undo static-bind mac-address
View
DHCP address pool view
Parameters
mac-address: The MAC address of a static binding, in the format H-H-H.
Description
Use the static-bind mac-address command to statically bind a MAC address to an IP
address in a DHCP address pool.
Use the undo static-bind mac-address command to remove the statically bound
MAC address.
By default, no MAC address is statically bound.
Note that:
Use the static-bind mac-address command together with the static-bind
ip-address command to complete a static binding configuration.
Chapter 1 DHCP Server Configuration Commands
1-25