Tftp-Server Ip-Address - H3C S7500E Series Command Manual

Command Manual – DHCP
H3C S7500E Series Ethernet Switches

1.1.33 tftp-server ip-address

Syntax
tftp-server ip-address ip-address
undo tftp-server ip-address
View
DHCP address pool view
Parameters
ip-address: TFTP server IP address.
Description
Use the tftp-server ip-address command to specify the TFTP server IP address in a
DHCP address pool.
Use the undo tftp-server ip-address command to remove the TFTP server IP address
from a DHCP address pool.
By default, no TFTP server address is specified.
Using the tftp-server ip-address command repeatedly will overwrite the previous
configuration.
Examples
# Specify the TFTP server address 10.1.1.1 in DHCP address pool 0.
<Sysname> system-view
[Sysname] dhcp server ip-pool 0
[Sysname-dhcp-pool-0] tftp-server ip-address 10.1.1.1
1.1.34 voice-config
Syntax
voice-config { as-ip ip-address | fail-over ip-address dialer-string | ncp-ip ip-address |
voice-vlan vlan-id { disable | enable } }
undo voice-config [ as-ip | fail-over | ncp-ip | voice-vlan ]
View
DHCP address pool view
Parameters
as-ip ip-address: Specifies IP address for the backup network calling processor.
Chapter 1 DHCP Server Configuration Commands
1-27