Qos Map-Table - H3C S7500E Series Command Manual

Command Manual – QoS
H3C S7500E Series Ethernet Switches
4
5
6
7
Table 4-1 Description on the fields of the display qos map-table command
MAP-TABLE NAME
TYPE
IMPORT
EXPORT

4.1.2 qos map-table

Syntax
qos map-table { dot1p-dp | dot1p-lp | dscp-dot1p | dscp-dp | dscp-dscp }
View
System view
Parameters
dot1p-lp: Specifies the 802.1p precedence-to-local precedence mapping table.
dot1p-dp: Specifies the 802.1p precedence-to-drop precedence mapping table.
dscp-dp: Specifies the DSCP-to-drop precedence mapping table.
dscp-dot1p: Specifies the DSCP-to-802.1p precedence mapping table.
dscp-dscp: Specifies the DSCP-to-DSCP mapping table.
Description
Use the qos map-table command to enter specific priority mapping table view.
Related commands: display qos map-table.
Examples
# Enter 802.1p precedence-to-drop precedence mapping table view.
<Sysname> system-view
[Sysname] qos map-table dot1p-dp
[Sysname-maptbl-dot1p-dp]
: 1
: 1
: 0
: 0
Field
Chapter 4 Priority Mapping Configuration
Name of the mapping table
Type of the mapping table
Input entries of the mapping table
Output entries of the mapping table
4-2
Commands
Description