Device Management Commands; Chapter 3 Device Management Commands - H3C S7500E Series Command Manual

Command Manual – System Maintaining and Debugging
H3C S7500E Series Ethernet Switches

Chapter 3 Device Management Commands

Note:
File names in this document comply with the following rules:
Path + file name (namely, a full file name): File on a specified path. A full file name
consists of 1 to 135 characters.
"File name" (namely, only a file name without a path): File on the current working
path. The file name without a path consists of 1 to 91 characters.

3.1 Device Management Commands

3.1.1 boot-loader
Syntax
boot-loader file file-url slot slot-number { main | backup }
View
User view
Parameters
file file-url: Specifies a file name, a string of 1 to 64 characters.
slot slot-number: Specifies the slot number of a card.
main: Specifies a file as a primary boot file.
backup: Specifies a file as a secondary boot file.
Description
Use the boot-loader command to specify a boot file on a card.
A primary boot file is used to boot a device and a secondary boot file is used to boot a
device only when a primary boot file is unavailable.
Related commands: display boot-loader.
Examples
# Specify the primary boot file of the device as plat.app.
<Sysname> boot-loader file plat.app slot 1 main
This command will set the boot file of the specified board, Continue? [Y/N]:y
Chapter 3 Device Management Commands
3-1